ELCOM Euro-100T, User Manual

Page: 33 / 84

33
Programming manual
3) Enter new function text that could have up to 17 characters. If you mistyped, you can correct mistakes
by pressing

(C
LEAR
) key. Details on entering texts are located at the end of this chapter.
4) Press

(S
UBTOTAL
) key to programme next available function text; continue with step 3). Finish the
function texts programming by pressing

(T
OTAL
) button at any time.
Correction of function texts
1) Switch the ECR to the “P” mode by pressing

.
Figure 3.15. Default function texts.
Text no. Default setting Description
1 CASH Cash payment denomination
2 CHECK Check payment denomination
3 CREDIT Credit card payment denomination
4 CHANGE Change value denomination
5 REFUND Refund value denomination
6 VOID Void denomination
7 RA Received on account denomination
8 PO Paid out denomination
9 TOTAL Total value
10 DOC.NUMBER Document number
2) Enter the number of text to be corrected and press

(V
OID
) key.
3) Continue in the same way as when programming function texts (consult section above).
4) Print out all programmed function texts by pressing

(C
HECK
) key; print the currently edited func-
tion text by pressing

(EAN) key.
5) Correction of function texts is finished by pressing

(T
OTAL
) button.
Function texts print out
To check the programmed function texts, press

(C
HECK
) key in function texts programming mode. If in
programming mode, press

(V
OID
) key first and then the

(C
HECK
) key. Print the value of a particular
function text by pressing

(EAN) key.
DEPARTMENTS PROGRAMMING
The Euro-100T cash register has 10 departments (DPT) available. Each department has three basic com-
ponents:
1) Price
2) Department flag
3) Name