EKOM DK50 4x4VRT/M, User Manual

Page: 34 / 74

INSTALLATION
NP-DK50-Nx4VRTM-AD-A-EN-4_03-2021 34 03/2021
Monitoring memory variables
The “LOGO! Variable” function is the other option for monitoring compressor parameters using
selected memory
variables. Click the “LOGO! Variable” button on the display to bring up a screen
and then use the “Add Variable” button to select specific memory variables for monitoring based on
the mapping provided by the compressor manufacturer.
Variables assigned based on addresses and models may be viewed in the MAPPING
PARAMETERS table (see the Annex chapter).
Select the variable parameters (per the annex) sequentially in the Range, Address, Type and
Display Format columns. Variable values are shown in the Value column. The monitoring table may
then appear as follows:
Note:

Time values are displayed in minutes. For instance, address 10 displays 120000 in minutes,
which is 2,000 hours.

Analogue values (pressure and temperature) are displayed without decimal places.
Logging out from the Web server:

Click on the button in the upper left
corner.
13. COMMISSIONING

Make sure all transport stabilizers were removed.

Check that all compressed air hose connections are correct.

Ensure the power cord is properly connected to the mains and other cables are connected
(compressor-dryer and compressor-air tank).

Check to ensure the outlet valve is in the OFF position.
The compressor is not equipped with a backup power supply.