EKOM DK50 4x4VRT/M, User Manual

Page: 45 / 74

OPERATION
03/2021 45 NP-DK50-Nx4VRTM-AD-A-EN-4_03-2021
drops below the limit.
The compressor supplies air to the
compressed air system as needed and
without restriction.

Compressor module internal temperature exceeds the limit.
WARNING - high temperature alarm inside
an enclosed compressor. The display
flashes orange.
This alarm appears if the temperature
inside the enclosed compressor module
exceeds the 70°C limit for at least 30
seconds.
The aggregates operate
normally.
Note: The internal temperature
monitoring function is not included on
unenclosed compressors.
The display shows the current temperature
inside the enclosed compressor module.
The alarm clears when the temperature
drops below the limit.
The compressor supplies air to the
compressed air system as needed and
without restriction.

Low pressure alarm during compressor start-up.
SIGNALING - Low pressure alarm during
compressor start-up. The display is backlit
and the P2 alarm indicator flashes.
LOW PRESSURE MODE - low pressure
signalling in the system with the aggregates
switched on.
DRYER - REGENERATION NOT
CYCLING - no purging of the dryer
chambers.
PRESSURE - current pressure in the
system.
The information on the display
automatically disappears once the air
pressure is above 3 bar.
The compressor supplies air to the
compressed air system as needed and
without restriction.