Eddyfi Technologies Floormap X, User Manual

Page: 93 / 106

SIMS PRO
93
2. Enter a template name and click Save .
NOTE
It is not possible to save plate specific reportables elements in a report template.
Exporting to Word
To export the report to a .docx document:
1. Click Word on the report tools ribbon.
2. Enter a file name and save location for the exported .docx file.
3. Click Save .
The report is saved and opens using the default program for .docx file and allows for further editing,
if required.
Exporting to PDF
To export the report to .pdf document:
1. Click PDF on the report tools ribbon.
2. Enter a file name and save location for the exported .pdf file.
3. Click Save .
The report is saved and opens using the default program for .pdf files.
5.11 Data Ribbon
The data ribbon allows the importation of additional inspection data and replacing plate data.
Import Additional Plates
To importing additional plates into an existing inspection:
1. Load the inspection that required additional plates to be imported too.
2. Click Additional Plates on the data ribbon.
3. Click Yes .
4. Select the importer.
5. Select the location of the inspection file to import.
6. Click Import .
NOTE
If a plate being imported already exists within the inspection, then the notification center
displays a message informing the plate already exists. No data for this plate is imported or
replaced.
Replace Plate
To replacing an existing plate in an inspection:
1. Select a plate.
2. Click Replace Plate on the data ribbon, or right-hand click and select Replace Plate .
3. Select the importer.
4. Select the location of the inspection file to import the plate data from.
5. Select the plate number to import from the dropdown.