Troubleshooting and Maintenance
102
Packing for Storage
If storage of the FloormapX system is required, then all components must be packed correctly. The
FloormapX should be stored:
•
In a clean, dry, and secure location.
•
Away from water and harsh environment conditions.
•
In such a way as to avoid damage to the system.
•
Case should be laid flat rather than stood upright.
REMOVE BATTERY
When the FloormapX system is powered off the battery must be removed from the right-
hand active battery slot and placed into the left-hand storage slot. The battery capacity has
a potential of discharging if left in the active slot when the system is not powered on.
6.3
Tablet
Cleaning
The tablet may be cleaned using a damp cloth. The screen can be cleaned using a dry microfiber
cloth.
The tablet should not require disassembly for any maintenance. If any issues are encountered with
the tablet functions, contact Eddyfi for fault finding information and troubleshooting.
6.4
User control
Cleaning
The user control can be cleaned with a damp cloth.
It is important that the height adjust plunger can fully engage in the receiving holes on the
mainframe. Before installing the user control, check the guide rails and index plunger is free from dirt
and debris, cleaning with a cloth if necessary. Whenever the user control is installed, check that the
indexing plunger has fully engaged before relying on the user control being fixed to the mainframe.
6.5
Mainframe
Cleaning
The mainframe can be cleaned with a damp cloth. Care must be made to ensure the battery
compartment is protected from moisture. The battery panel should always be fitted whenever the
system is in use.
Consumables/Spares
Repositioning wheels
The repositioning wheels may be replaced by the user. To replace the repositioning wheels, remove
the circlip, remove the wheel, replace with a new wheel, and replace the circlip. Contact an Eddyfi
service center for spare parts and an instructional video.
Summary of Contents for Floormap X
