7.9.8.1 Acknowledge automatically:
The pump switches to Pause on empty signal and the empty signal symbol is displayed in
red . The suction pipe issues a "Full" signal to the pump after a container change and
the container change is detected and accepted without further confirmation.
Fig. 54: Acknowledge automatically
[Acknowledge automatically] - setting:
1.
[Main menu]
:
Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu]
Chapter 7.9 ‘Overview - Configuration’ on page 83
3.
Use the scrollbar to scroll to the
[Select empty signal]
menu option.
4.
[Select empty signal]
- select.
5.
If required,
‘empty message contact’
:
‘closed contact = select empty signal’
ð
After selecting this, a check mark is set in the selection field.
6.
[ Press the Next button]
.
ð
Screen changes to the acknowledgement query of the
‘empty signal’
.
7.
[Acknowledge automatically]
- select.
8.
Pressing the button saves the setting.
ð
The screen switches to the overview:
[Configuration menu]
.
9.
Pressing the button returns to the
[Main menu]
.
10.
Pressing the button returns to the
[Operating display]
.
Control / software
95
Rev. 2-05.2018
