7.8.2.2 [Operating mode] [Pulse] - Quantity
Fig. 37: Operating mode: Pulse
1.
[Main menu]
Chapter 7.6 ‘Main menu’ on page 66
2.
[Operating mode]
-
[Pulse]
- select.
3.
[Press the Next button]
.
ð
Screen change for setting:
‘Pulse interval’
.
4.
DO NOT enter a pulse interval, or set pulse interval to 0!
To do this, set the decimal places to 0 using the scrollbar.
Then select the field for entering the decimal point and also set the decimal point to 0
using the scrollbar.
5.
[ Press the Next button]
.
ð
The screen changes to the
‘Pulse memory’
prompt.
6.
Select whether the
‘pulse memory’
is to be used.
ð
If you select the
‘Pulse memory’
, a appears in the selection box.
7.
Press the button.
ð
Settings are saved, and the screen returns to the
[Operating mode]
.
8.
Press the button.
ð
The screen switches back to the overview
[Main menu]
.
9.
Press the button.
ð
The screen switches back to the
[Operating display]
.
10.
Keep the displayed value (l/pulse) for the rate pressed down for approx. 3 seconds.
ð
The configuration page for converting the unit (l/pulse) is displayed.
11.
Tap the required unit (l/pulse, ml/pulse, G/pulse) of the concentration setting and
select the required unit.
12.
Press the button.
ð
The screen switches back to the concentration setting.
13.
If necessary, adjust the concentration value with the newly set unit.
14.
Press the button.
ð
The screen switches back to the
[Operating display]
.
Control / software
76
Rev. 2-05.2018
