![Ecolab EcoAdd Operating Instructions Manual Download Page 63](http://html1.mh-extra.com/html/ecolab/ecoadd/ecoadd_operating-instructions-manual_2354521063.webp)
7.4.1
Symbols in operating mode
Symbol
Description
Metering mode and signal to indicate that the pump is running
With every stroke of the pump, the display background flashes in the top right.
The letter shown represents the metering mode that is currently selected:
= standard,
= medium;
= low,
= variable
Chapter 7.4 ‘Display view during ongoing operation (example)’ on page 62
"External Lock" with orange background:
Indication that the pump has been locked by an external signal:
Level signal - Level pre-warning - Low level:
Flashing display with an orange background = Level pre-warning
Level signal - Empty signal - Chemical container empty:
Red display permanently shown = Empty signal
Level indicator - container setting: Canister
In the
[Configuration menu]
the
[Container size]
is set. This displays a canister instead of the
empty alarm symbol, representing the determined fill level graphically.
Service info with orange background
Forthcoming service indicating the number of weeks until the service is due.
Service info with a red background
Overdue service indicating the number of overdue weeks.
Timer - [access code] ‘Administrator (A)’
Elapsing timer for the short-term cancellation of a code lock as
‘Administrator (A)’
(5 min.)
Timer - [access code] ‘Operator (O)’
Elapsing timer for the short-term cancellation of a code lock as
‘Operator (O)’
(5 min.)
Timer - [access code]
If only 1 code has been entered, no code appears underneath the elapsing timer.
Metering lock enabled
With the metering lock activated, the pump only runs when an external enable contact is
closed. The operating mode does not affect the use of the metering lock.
Bluetooth connection
Bluetooth connection available to a smartphone.
[access code]
Display
[access code]
for restricted menu functions. To secure against adjustment of the pump
settings, an
[access code]
can be switched on
Chapter 7.9.4 ‘Access code’ on page 88
.
Lock open
=
[access code]
inactive. Lock closed
=
[access code]
active.
Control / software
63
Rev. 2-05.2018