7.2
Start Screen
When the pump is switched on, the following
is displayed for about five seconds:
n
Specific pump key
n
Specific production code,
n
Version of the software used
n
Supply voltage of the pump
n
Used materials for pump head an,
diaphragm, sealings and valves.
Fig. 21: Start Screen
1
Manufacturer's logo
2
Pump size, litre capacity of the pump
3
Materials of the pump components
4
Specific pump datas
5
Spezific pump key
6
Material of valve ball
As the pump has a hardware detection feature whose software checks the devices
connected, the display may last for more than five seconds under certain circumstances
until the check has been completed. The screen then changes to the operating mode.
The
‘Info’
screen can be called up at any time via the menu:
Chapter 7.12 ‘Info’ on page 121
.
7.3
Using the touchscreen
This chapter describes the buttons, symbols and input options used on the
touchscreen.
Some of the operating elements shown on the touchscreen can be selected by
touch.
In the following chapter, the instructions for the settings are indicated by a hand
or in the diagrams.
The view marks an action step. The view marks the way back to the
previous menu level.
DANGER!
The touchscreen can be damaged if it is used incorrectly.
The touchscreen is designed to be operated by finger.
Do NOT use any sharp objects (for instance, tools, pencils, pens, etc.)
to operate the touchscreen!
Control / software
57
Rev. 2-05.2018
