ECKELMANN VS 300, Operating Instructions Manual

Page: 116 / 172

Parameter List and Menu Structure of VS 300
108 Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
8.1.10 Parameter List S3: Basic Settings System Configuration
Parameter
No.
Function /
Description
Range Default Dim. Displayed /
Condition
NT LT HP
S390 Select controller confi­
guration 0: CL1 = LT control
CL2 = LT control
- - - -
Requires Superuser mode ac­
cess rights
(Parameter
A060 = 10 )
1: CL1 = LT control
CL2 = NT control
2: CL1 = LT control
CL2 = HP control
3: CL1 = NT control
CL2 = NT control
4: CL1 = NT control
CL2 = HP control
5: CL1 = HP control
CL2 = HP control
6: CL1 = NT control
CL2 = LT control
S391 Load default settings 0: Preserve existing settings
1: Load default settings
0 0 0 -
S392 Parameter backup 0: No parameter backup
1: Back up parameters
0 0 0 -
S393 Delete run time archi­
ves 0: Preserve archives
1: Delete archives
0 0 0 -
S394.1[1]..
S394.[m]
und
S394.[n]..
S394.[o]
Reset operating hours
for relay stages 1 - 12
1)
0: Preserve operating hours
1: Reset operating hours to 0
- - - -
Requires Superuser mode ac­
cess rights
(Parameter
A060 = 10 )
CL1: S301 > 0
[m]=
Basic configuration (<=4):
[
Value S301 ]
1st expansion stage (<=8):
[
Value S301 ]
2nd expansion stage (<=12):
[
Value S301 ]
or
CL1: S331 > 0
[n]= Value S301 ] + 1
[0]=
Basic configuration (<=4):
[n] + [
Value S331 ]
1st expansion stage (<=8):
[n] + [
Value S331 ]
2nd expansion stage (<=12):
[n] + [
Value S331 ]
1)
Maximum values varying with expansion stage/Number of relay stages can be 4/8/12