ECKELMANN VS 300, Operating Instructions Manual

Page: 101 / 172

Operation of VS 300
93 Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
7.16.1 Menus and operating screens
If the system centre, store computer or operator terminal remain locked down, settings on the con­
troller are read-only.
Changes and inputs are not possible. However, if any parametrisation is required, the lock-down for
the input must be removed first, see chapter 7.16.3.
Numbering of menus and screens:
Every menu in the menu tree can be reached using a specific number and every operating screen in a menu
can be reached using a specific selection in the menu. This is identified in the operating manual by a unique
identifier of digits (and letters if necessary) in the menu tree (e.g. Menu 3-1-2-a). Thereby, the digits 1, 2, ..
stand for the identification of the corresponding menu, and the letters a, b, .. stand for the sequence of the corre­
sponding operating screens in the menu.
Example for the numbering of a menu / screen
Any reference to, for example Menu 3-1-2 in the operating manual means that the required menu of the E*LDS
component is called by entering the digits or selection of "3 - 1 - 2" via the remote control in the system centre,
store computer or operator interface. The menu item "Remote control" is the interface for the E*LDS controller;
see chapter 7.16.2 for details.
If any letter is appended (e.g. Menu 3-1-2-a), this means that another submenu (operating screen or selection
list) can be reached using the cursor right button (
→
). The letters indicate their sequence in the screen.
If any menu or operating screen consists of more lines than are possible in the display, scrolling is possible us­
ing the cursor buttons (
↑
) and (
↓
).
3 . Sub menu
C I 3x00 / A L 300
BT 300 x
ESC
RESE T
Operator interfaces on l y for
- UA 300 Fami l y
- UA 400 Fami l y
- WR 300
- WR 400
1 Summary
2 Actual values
3 . Sub menu
Menu 3 - 1 - 2
2 . Sub menu
1 System conf.
2 ...
3 ...
3
E* L DS component
Z
N
R
.
51203
67
930
E4
1 . Sub menu
1
Menu 3 - 1
2
Sub masc
Menu 3 - 1 - 2 - a
a
C I 4x00
Configuration
Anlagenübersicht
Read
only
Controller
LT Milk
LT Island
NT Room
Service
Remote contro l
Main menu
1 Summary
2 Actual values
3 Setpoints
4 ...
via
CA N bus
via
CA N bus
via
D I SP L AY
interface
REMOTE CONTRL XXX
CONTROLLER NAME
Item ID XXX
Contro ll er menu
Empfangsmodul
Funksensoren
Verbund-
steuerungen
Kühlstellen-
regler
1 . sub menu Main menu
1
5
6
4
Main menu
1
1
1 Alarms
2 Overview
3 Archive
4 Messages
5 Remote Control
6 Store Computer
7 ...
ALARM XXX
CONTROLLER NAME
Item ID XXX
...
MSG/ALARM xxx
CONTROLLER NAME
Item ID XXX
Input screen
2
Menu 6-1-2
1 Expansion Stage
2 Alarm Inputs
3 ...
2 . Sub menu
REMOTE CONTRL XXX
CONTROLLER NAME
Item ID XXX
1 . Sub menu
In contrast to the system centre, store computer or operator terminal,
the menu of the controller is displayed directly on the operator interface.