EBS
Ink-Jet Systems
®
EBS-6100
Printer User's Manual
Paragraph 4 - Operating the Printer
20070529#20.5
35
NOTE:
•
While editing a graphics block you can modify parameters of a
Graphic
subfile at any time (by
pressing the
§
key).
•
After the edition of a graphics block has been completed, empty vertical rows to the right of the
last non-blank row are deleted automatically. Therefore the block length changes and differs
from the original setting.
By pressing the
«V
keys you will move to the graphics processor
, where every
dot can be inserted/erased. The image is magnified four times to make individual pixels more
visible on the display. The graphic cursor coordinates are shown in the status window on the
terminal display. A reference point for them is at the top left corner of the graphic block.
X:
horizontal coordinate
Y:
vertical coordinate.
GRAPHICS PROCESSOR - A Description of Function Keys
ª
To show in inversion (off/on) a point indicated by the cursor.
¨
To switch between the editor pen modes:
UP
/
SET
/
CLEAR
.
UP
lift up the pen,
SET
set the pen in the >
write
< mode,
CLEAR
set the pen in the >
erase
< mode.
The pen status is displayed in the terminal status window.
I
To invert (enable/disable) every element of a graphic subfile irrespective of
the pen state defined with the
¨
key.
¢¡£¤
To move the cursor right, left, up or down according to the pen mode. If the
cursor is moved right, beyond the length limit, new vertical rows are inserted
and the subfile length is modified.
Y
¢¡£¤
To move the cursor by 8 dots in the direction indicated by the arrow.
¥
To insert an empty vertical row and move the following rows by one row to
the right.
¦
To delete the vertical row where the cursor is and move the rows further on
by one dot to the left.
Y
¥
To insert one blank horizontal row and move the below rows by one dot
down (with no change in the subfile height).
Y
¦
To delete the horizontal row where the cursor is and move the downward
rows by one dot up (with no change in the subfile height).
V
To confirm modifications and return to the word processor.
U
To cancel modifications and return to the word processor.
Subfile Type: B
AR
C
ODE
A
B
AR
C
ODE
subfile is a bar-code block. The processor offers an option to create various
barcodes defined by the applicable standards.
!
Summary of Contents for EBS-6100
Page 1: ...EBS Ink Jet Systems EBS 6100 USER S MANUAL...
Page 2: ......