EBS EBS-6100, User Manual

Page: 53 / 134

EBS
Ink-Jet Systems
®
EBS-6100
Printer User's Manual
Paragraph 4 - Operating the Printer
20070529#20.5
51
NOTE:
If the TEXT SERVICE MENU option (!) is protected with a user password, you are
prompted to type in the password before the PARAMETERS SERVICE option is displayed.
For details on how to use the user password see section
4.4.1.9 Using the Password
.
Parameter blocks are stored in a library in the printer’s memory. Each block goes with an up
to 8-character name. The name can be built up of alphabetical (small and capital) letters,
digits and some symbols except spaces, dots or characters such as: \ / : * ? ” < > |, e.g.
12345678 , AB#%CD& , Weight-5 , JUICE-12 , DATEtime , Q1 , @8 , etc. Every parameter block
contained in the library can have the read only attribute assigned to it to prevent it from being
deleted or modified by an unauthorised person. The read only attribute can be assigned
to/removed from a single parameter block or all block in the library. For more information refer
to paragraph
4.4.2.6 Accessing the Parameter Block Library
.
Block names are arranged in alphabetical order. The following facilities enable the user to
move along the block directory freely:
•
the
¡¢¤£
keys to move the cursor from one block name to the other,
•
the leading character (a letter or digit) to move the cursor to the first name that starts
with this character,
•
the
Y¢
( HOME ) or
Y£
keys to move the cursor to the first name in the
library,
•
the
Y¡
( END ) or
Y¤
keys to move the cursor to the last name in the library.
NOTE:
If the printer memory is overfilled (with a lot of or very long text files or parameter blocks),
the parameter-block names may not be arranged in alphabetical order and some facilities
may not be effective.
4.4.2.1. Creating and Editing a New Parameter Block
In the main MENU select the PARAMETERS SERVICE item and then the
CREATE NEW BLOCK item, type in a block name consisting of up to eight
characters and confirm.
NOTE:
•
If the block name already exists in the library, the parameters are displayed on
the terminal and can be edited.
•
Once the parameter block has been created, it remains in the printer’s
memory even after power supply has been switched off. The block can be
deleted.
After the name has been typed in, a parameter processor is used to input settings. All
parameters in the parameter menu have their default settings
6
. Any modifications (for
modifications see below) need to be confirmed and then a new parameter block with
the user-defined name is formed in the library.
For linking parameter blocks with subfiles see section
4.4.1.8 Linking File Names
with Parameter-Block Names
.
Modifying Parameters
The following keys help you to move along the parameter list or to modify
settings:
the
¤
and
£
keys to move the cursor to parameter boxes,
6
Default setting - initial setting suggested by the Manufacturer.
!
!
!