EBS EBS-6100, User Manual

Page: 14 / 134

EBS-6100
Printer User's Manual
Paragraph 2 - Installing the Printer
EBS
Ink-Jet Systems
®
12
20070529#20.5
Should the eyes or skin get irritated:
EYES need to be rinsed with running water for at least 15 minutes, then you
should see your eye doctor,
SKIN needs to be washed with water and soap.
2.2. Power Supply Requirements
Mains Requirements
Standard Option
Supply voltage 100-240V (AC) 90-350V (DC)
Mains frequency 45-440Hz DC
NOTE:
•
The mains electricity must meet the requirements of the applicable standards. Otherwise
measures need to be taken or devices used to ensure that the proper power is applied to
the printer.
•
The mains socket should be equipped with a protective pin properly connected to
earth. The efficiency of the earth needs to comply with the applicable standards.
2.3. Installing the Printer
2.3.1. Standard and Optional Accessories
As a variety of configurations of
EBS-6000
series printers are available, the set of
accessories installed by the user depends on a specific user application. Typical printer
accessories include:
a). Elements and units which are needed for printing in every configuration,
b). Additional and supportive elements and units which are needed for a given configuration
to satisfy user requirements.
List of the accessories that are used most frequently in various printer configurations:
1.
Printer (control cabinet and the head),
2.
Complete head holder,
3.
Photo detector, an optical sensor,
4.
Shaft-encoder, a conveyor’s travel-speed indicator,
5.
Bottle of ink,
6.
Bottle of solvent,
7.
Bottle of wash-up,
8.
Wash-up spray,
9.
Filters:
a). Main ink filter,
b). Ink filter in the head gun,
c). Filter elements for suction tubes in bottles,
d). Air filter,
e). Air filter element for electronic chamber ventilation system.
10.
RS232 interface cable to PC,
11.
Original rack for EBS-6000 series printers,
!