EBS-6100
Printer User's Manual
Paragraph 2 - Installing the Printer
EBS
Ink-Jet Systems
®
16
20070529#20.5
2.3.5.
Connecting bottles of ink and solvent
1.
Insert suction pipes to the bottles of ink and solvent. Check for filters on the pipe tips. The
caps of ink and solvent bottles can be distinquished from each other by the number of
pipes going from the printer's ink system to either cap. The ink bottle cap contains one
pipe whereas the solvent bottle cap - three pipes.
2.
Screw the bottles into the caps where the pipes are inserted and place them in a cavity in
the ink system door.
NOTE:
•
Make sure that the original ink and solvent are contained in the bottles. A possible
mistake may result in damage to ink contained in the unit’s containers (due to a change
to the chemical structure of ink) and cause many serious problems.
•
Avoid
misplacing the bottles of ink and solvent or placing the bottle of solvent
where the bottle of ink should be
.
•
Different types of ink must not be mixed. Do not add to the bottle any ink whose
shelf life has expired.
2.4. Removing the head casing
To gain access to inner parts of the head, remove the head from the holder and remove the
casing. The operation involves the following steps:
•
Unscrew the fixing screw on the head casing ,
•
Remove the head from the casing carefully .
Y
X
Direction
of removal
Unscrew in
this direction
Head
casing
The screw secures the head
casing and ensures electrical
contact between the metal
casing and the printer earth
Fig. 2.4.1.
!
Summary of Contents for EBS-6100
Page 1: ...EBS Ink Jet Systems EBS 6100 USER S MANUAL...
Page 2: ......