EBS
Ink-Jet Systems
®
EBS-6100
Printer User's Manual
Paragraph 4 - Operating the Printer
20070529#20.5
69
Microscope
with scale
Watching the
gutter with
microscope
Print head
Fig. 4.4.4.8.2.
7)
Cover the head outlet with a paper tissue as the ink starts flowing out of the
head after the command has been executed!!!!
8)
Execute the
SET INK STREAM
command.
9)
The following message is displayed on the terminal:
Type in:
Y
to confirm, if the print parameter settings are effective - see point
4)
,
N
to cancel if the print parameter settings are not effective.
If the operation is confirmed, ink starts flowing out of the head. This takes about
15 seconds, and the following messages are displayed on the terminal:
Press the
U
key to interrupt the execution of the
SET INK STREAM
command.
Press the
V
key to resume the execution of the command after it has been
stopped automatically for a short time.
Use any keys apart from the above mentioned ones in order to change the
position of drops in relation to the gutter in horizontal direction during the
execution of the command - see the NOTE below.
Summary of Contents for EBS-6100
Page 1: ...EBS Ink Jet Systems EBS 6100 USER S MANUAL...
Page 2: ......
