EBS EBS-6100, User Manual

Page: 16 / 134

EBS-6100
Printer User's Manual
Paragraph 2 - Installing the Printer
EBS
Ink-Jet Systems
®
14
20070529#20.5
Head holder
Photo detector holder
Head axis
37 mm
2xM5
Fig. 2.3.2.2. Fixing the standard head holder to a conveyor
Secure the print head in the holder in any required position.
Install the photo detector in clamps fixed to the head holder or in any other place which
would be most suitable for the object under print.
NOTE: If conveyor vibration is too strong, it would be better to fasten the head holder
on a stable rack or on a wall, provided that the rack and the wall are not in
contact with the conveyor.
2.3.3. Removing transport protections
The cylinders are protected against spilling the liquid contents in the event the printer tilts or
shakes during transportation. Therefore some of the internal connections are separated,
pipes are removed and the holes are plugged. The protections need to be removed and each
of the connections restored.
1. Remove plugs from the connectors (couplings) , , .
2. Connect corresponding pipes according to the following diagram.
RET
VAC
R3
tank
R3
bott
le o
f ink
air filter
head gutter
V3
valve manifold
Fig. 2.3.3.1. View of connections on tank covers and inside the unit.
!