150
Typ EP 501
Auxiliary functions
24.3. Manual configuration of
X.TUNE
This.function.is.needed.for.special.requirements.only..
For standard applications the
X.TUNE
function has been preset at the factory.
See chapter “21.2. X.TUNE – Automatic adjustment of the positioner”.
For special requirements the
X.TUNE
function, as described below, can be manually configured.
Opening.the.menu.for.the.manual.configuration.of.
X.TUNE
Key
Action
Description
MENU
Press
for approx. 3 s
Switching from process level
setting level.
/
Select
X.TUNE
RUN
Briefly press
Opening the
Manual.TUNE
menu. The menu options for the manual
configuration of
X.TUNE
are displayed.
X.TUNE; opening the menu for the manual configuration of X.TUNE
INPUT
INPUT
X.TUNE
X.TUNE.CONFIG
X.TUNE.POS
X.TUNE.PWM
X.TUNE.AIR
X.TUNE.DBDx
ACT.limit
yB.min
ACT.nolimit
yE.min
POS.pMIN
POS.pMAX
X.TUNE.PARAx
X.TUNE.LEAKAGE
X.TUNE.Ypwm
X.TUNE.Yfric
Selecting.functions.for.
X.TUNE
Determining.end.positions
Optimizing.PWM.signals
EXIT
EXIT
EXIT
SELEC
SELEC
RUN
ENTER
ENTER
ENTER
RUN
ENTER
ENTER
press.
briefly
EXIT
Dead band
Control parameter
positioner
Leakage test
Parameter PWM
signals
Friction behavior
Input values
Acknowledge
value
Values are
displayed
Hold down
as long as countdown (5 ...) is running
Determining.opening.and.closing.times
OK
OK
EXIT
Figure 90:
Operating structure for the manual configuration of X.TUNE
english
