51
Typ EP 501
Operation
16.3. Adjusting the display
The display can be individually adjusted for the operation and monitoring of the process.
• To do this, menu options can be activated for displaying the process level.
POS
and
CMD
are activated in the
as-delivered state.
• The menu options which can be displayed depend on the type.
How you can adjust the display individually to the process to be controlled is described in Chapter
"24.2.18. EXTRAS – Setting the display", page 121 ".
16.3.1. Possible displays of the process level
Possible.displays.in.AUTOMATIC.operating.state
MENU
CMD/POS
CMD MANU
POS
0.0
Actual position of the valve actuator
(0 ... 100 %)
MENU POS TEMP MANU
CMD
0.0
• Set-point position of the valve actuator or
• Set-point position of the valve actuator after rescaling by possibly
activated split range function or correction characteristic
(0 ... 100 %)
MENU CMD
CMD/POS
TEMP
0.0
C
Internal temperature in the housing of the device
( °C)
MENU TEMP
SP
MANU
PV
0.0
m3/min
Process actual value
Only.for.Type.EP.501.C
MENU
PV
PV (t) INPUT
SP
0.0
m3/min
Process set-point value
Right selection key
:
The key function depends on the set-point value default
(menu:
P.CONTROL
→
P.SETUP
→
SP-INPUT
→
internal/external)
.
INPUT
Set-point value default =
internal
MANU
Set-point value default =
external
Only.for.Type.EP.501.C
MENU
HOLD
SP / PV (t)
Graphical display of
SP
and
PV
with time axis
Only.for.Type.EP.501.C
english
