5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
100
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
107
(6Bh)
Module type ID
G
ENUM
USINT
Describes the module type: see attribute
107 (6Bh) on page 86
108
(6Ch)
Module
command inter-
face
G/S
ARRAY
The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh
Module response
interface
G
ARRAY
Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh)
Module regis-
tered index
G
ENUM
USINT
Contains the index numbers specified in all
the module lists.
111
(6Fh)
Number of
supported
channels
G
USINT
States the number of analog input channels
supported by this module Instance.
112 -
119
(70h -
77h)
Produced data
G
INT
Contains the data received by the analog
input module of channels No. 1 to No. 8.
Only those channels are supported that are
contained in attribute 111, "Number of
supported channels".
Attribute 112 contains the data for channel
1, attribute 119 for channel 8.
120 -
127
(78h -
7Fh)
Diag data
G
BYTE
Contains the diagnostic data of the channels
1 to 8 of the analog input module.
Only those channels are supported that are
defined in attribute 111, "Number of
supported channels".
Attribute 120 contains the data for channel
1, attribute 127 for channel 8.
BYTE diag:
Bit 0:
0 = ok
1 = measurement value range error
Bit 1:
0 = ok
1 = open circuit
Bit 2:
0 = ok
1 = short-circuit
Table 53:
Object instance
Attr.
no.
dec.
(hex.)
Attribute name
G
et/
S
et
Type
Description
