Eaton XN-GW Series, User Manual

Page: 139 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
139
134
(85h) Auto recovery
output_1 G/S DWORD The outputs switch on automatically after
an overload.
135
(86h) reserved - - -
136
(87h) reserved - - -
137
(88h) Retriggered
recovery
output_1 G/S DWORD The outputs (channel 1 to 32) have to be
retriggered in case of an overload.
138
(89h) Retriggered
recovery
output_2 G/S DWORD The outputs (channel 33 to 64) have to be
retriggered in case of an overload.
139
(8Ah) Enable high side
output driver_1 G/S DWORD Enables the high side output driver of chan-
nels (channel 1 to 32).
140
(8Bh) Enable high side
output driver_2 G/S DWORD Enables the high side output driver of chan-
nels (channel 33 to 64).
141
(8Ch) Enable low side
output driver_1 G/S DWORD Enables the low side output driver of chan-
nels (channel 1 to 32).
142
(8Dh) Enable low side
output driver_2 G/S DWORD Enables the low side output driver of chan-
nels (channel 33 to 64).
143
(8Eh) Filter 2500 μ s
channel 1
G/S DWORD Enables the input filter of the channel
(channel 1 to 32).
144
(8Fh) Filter 2500 μ s
channel 2
G/S DWORD Enables the input filter of the channel
(channel 33 to 64).
145
(90h) Fault value G/S DWORD Activates the fault value for the channel
(channel 1 to 32).
146
(91h) Fault value G/S DWORD Activates the fault value for the channel
(channel 33 to 64).
147
(92h) Block Diagnostics G/S DWORD Channel specific diagnostic information is
blocked (channel 1 to 32).
148
(93h) Block
Diagnostics G/S DWORD Channel specific diagnostic information is
blocked (channel 33 to 64).
Table 59:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description