Eaton XN-GW Series, User Manual

Page: 137 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
137
105
(69h) Module order
name G SHORT
STRING Contains the name of the module, for
example, "XN-4DO-24VDC-0.5A-P".
106
(6Ah) Module
revision G USINT Contains the revision number of the module
firmware.
107
(6Bh) Module type ID G ENUM
USINT Describes the module type: see attribute
107 (6Bh) on page 86
108
(6Ch) Module
command inter-
face G/S ARRAY The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh) Module response
interface G ARRAY Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh) Module regis-
tered
index G ENUM
USINT Contains the index numbers specified in all
the module lists.
111
(6Fh) Module output
channel count G USINT Contains the number of input channels
supported by the module.
112
(70h) Module input
channel count G USINT Contains the number of output channels
supported by the module.
Input data
113
(71h) Module input_1 G DWORD Input data of the module (according to chan-
nels).
114
(72h) Module input_2 G DWORD Input data of the module (according to chan-
nels).
Output data
115
(73h) Module output_1 G DWORD Output data of the module (according to
channels).
116
(74h) Module output _2 G DWORD Output data of the module (according to
channels).
Diagnosis data
117
(75h) Open circuit
error_1 G DWORD This attribute contains diagnosis informa-
tion about open circuit errors (according to
channels).
118
(76h) Open circuit
error_2 G DWORD This attribute contains diagnosis informa-
tion about open circuit errors (according to
channels).
Table 59:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description