CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
45
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
3.
Select the Baud Rate from the BAUD RATE drop-down menu
(Figure 33, C)
.
Choose from the following baud rates:
a.
1200
b.
9600 (default)
c.
19200
d.
38400
e.
57600
f.
115K
g.
230K
h.
460K
4.
If you chose Modbus RTU for the device protocol, you can select the
Stop Bits from the STOP BITS drop-down menu
(Figure 33, D)
. Choose
from the following number of stop bits:
a.
1 (default)
b.
2
5.
If you chose Modbus RTU for the device protocol, you can select the
Parity from the PARITY drop-down menu
(Figure 33, E)
. Choose from
the following types of parity:
a.
None (default)
b.
Even
c.
Odd
6.
Enter the COM1 Timeout value
(Figure 33, F)
. The Timeout value is
expressed in milliseconds.
NOTICE: The default value of the COM1 Timeout value is
2000 ms.
7.
You can SAVE ALL SETTINGS, VIEW CHANGES or DISCARD CHANGES
that you have made. For details on how to use these functions, see
Common PXG600E Configuration Functions on page 39
.
