CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
103
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Manually Enter IPv4 Address
4.
If your network uses a static IP address:
NOTICE: The data in these fields must be entered using the
correct format or an error message will appear.
a.
Uncheck the “Automatically Obtain IP Address” box
(Figure 102, A)
.
b.
Enter the Static IP Address
(Figure 102, B)
.
NOTICE: Changing the static IP address will disconnect your
browser if you are configuring through the Ethernet LAN
port on the PXG600E.
c.
Enter the Netmask
(Figure 102, C)
.
d.
Enter the Gateway
(Figure 102, D)
.
e.
If you will be using one or more Domain Name Servers, type the IP
address of each Domain Name Server in the corresponding Name
Server box
(Figure 102, E)
. Up to three IP addresses can be
entered.
NOTICE: When you enter the configuration for any
Application Server (such as Access Control and email) you
will be asked for the address of the host or server. If you
enter the name of the server instead of the IP address you
MUST enter the IP address of at least one Domain Name
Server in a Name Server box
(Figure 102,
E)
.
Figure 102
5.
You can SAVE ALL SETTINGS, VIEW CHANGES or DISCARD CHANGES
that you have made. For details on how to use these functions, see
Common PXG600E Configuration Functions on page 39
.
PXG600E_337
A
B
C
D
E
