CHAPTER 7 - ACCESSING THE PXG600E
33
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Using an Ethernet LAN Connection
Use this procedure to connect the PXG600E Ethernet LAN port to an
Ethernet LAN port on your computer and login.
Requirements
To connect the PXG600E to an Ethernet LAN you must have:
•
A 32 or 64 bit, PC-compatible, computer
•
Either
of the following
•
CAT 5 STP*/UTP. *Based on the applications, STP may be necessary
for electromagnetic immunity requirements. A CAT 5 Ethernet LAN
cable is for connecting the PXG600E Ethernet LAN port to the
Ethernet LAN system, such as to a router or switch.
•
An Ethernet LAN Crossover cable. An Ethernet LAN Crossover cable
is for connecting the PXG600E Ethernet LAN port directly to the
Ethernet LAN port on your computer without connecting to the
network.
Procedure
1.
Review the requirements for configuring the Ethernet LAN in
Connecting to an Ethernet LAN on page 205
.
2.
Connect one end of an Ethernet LAN cable to the PXG600E Ethernet LAN
port
(Figure 20, A)
and the other end to an empty Ethernet LAN port on
the network or on your computer.
Figure 20
3.
After you connect both ends of the Ethernet LAN cable, wait at least two
minutes for the PXG600E to be properly recognized by your computer.
PXG600E_019
A
COM 1
INCOM
COM 1
REST
AR
T
SHLD
D2
D1
CMN
A (-)
B (+)
+ V
GND
1 2
PXG 600E
24 VDC
UPSTREAM
DOWNSTREAM
COM 2
A
B
CMN
A (-)
B (+)
COM 2
B
A
INCOM
