CHAPTER 9 - DEVICE CONFIGURATION TABS
137
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
4.
Enter the
Priority
(Figure 140, A)
.
You can assign a level of priority for each parameter. There are five
levels:
•
Critical
•
Major
•
Normal
•
Minor
•
Cautionary
•
Event Only
Critical, major, normal, minor or cautionary priorities are considered
alarm conditions. That means when the trigger conditions you have
selected for the parameter are met you must take an action to clear the
cause of the alarm. After you have cleared the cause of the alarm the
report for the condition for the parameter will change from “Condition
Present” to “Condition Cleared.”
If the priority is set as “Event Only” the condition of the parameter is
automatically reported as “Condition Cleared.” No user action is needed
to change the condition reported for the parameter.
NOTICE: You cannot close an event until it is reported as
“Condition Cleared.” See
PXG800E Home Web Page Events on
page 157
for additional details on how events are reported.
5.
Select another parameter and repeat
Step 1
to
Step 4
. Repeat
Step 5
as many times as necessary to enter all of the parameters you wish.
6.
Click another tab to continue customizing the parameters for the device.
7.
If you have completed customizing the parameters go to
Saving the
Entries on page 142
.
Figure 140
PXG600E_375
A
