manualshive.com logo in svg

Eaton PXG600E, User & Installation Manual

Share
Download
Eaton PXG600E User & Installation Manual Download Page 183

CHAPTER 12 - ADDING SUPPORT FOR NEW DEVICES

173

EATON 

PXG600E User Manual • IM02603003E 

Rev 5, 11-May-2012 • Firmware Version 5.03:3835

Chapter 12

Adding Support For New Devices

The PXG600E, as shipped, supports a large number of Eaton and third party 
downstream devices. However, support for additional Eaton devices and 
third party devices will be necessary over the life of the PXG600E. As the 
support for new devices is developed via the electronic data sheets (EDS), 
they will be made available to all PXG600E users and can be downloaded 
from the website: 

www.eaton.com/pxg

.

If you have a device that is not currently supported and requires support 
through the PXG600E, please refer to the appropriate section on the website: 

www.eaton.com/pxg

.

 There you will find the procedure for requesting 

New Device Support or you can contact your local sales office or the 
Technical Support Team.

Technical Support contact info:
Phone - 1.800.809.2772 or 1.414.449.7100
Email - 

[email protected]

Summary of Contents for PXG600E

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands