CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
94
2.
The next screen that comes up will depend upon whether you are
editing a Main, Bus or a Bus device (I/O, Meter, Submaster, Meter Point
and Pulse Counter). Here are the specific procedures:
a.
To edit Main parameters, start at
Step 20
of the
Adding a New
Main - Step-By-Step
procedure. The steps to define and edit the
parameters are the same.
b.
To edit the name of a Bus, start at
Step 8
of the
Adding a New Bus
- Step-By-Step
procedure. The steps to define the name and edit
the name are the same.
c.
To edit devices that connect directly to the PXG600E COM1 or
INCOM start at
Step 11
of the
Devices That Connect Directly to
PXG600E
. The steps to define and edit the parameters are the
same.
d.
To edit submasters start at
Step 11
of the
Procedure for
Submaster
. The steps to define and edit the parameters are the
same.
e.
To edit meter points start at
Step 13
of the
Procedure for IQMESII
Meter Point
. The steps to define and edit the parameters are the
same.
f.
To edit pulse counters start at
Step 11
of the
Procedure for Pulse
Counter
. The steps to define and edit the parameters are the same.
