CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
127
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Time Settings
Time Settings allows you to synchronize the PXG600E with the Network
Time Protocol (NTP) servers, or you can manually enter the time and date. If
you choose to use the NTP, you may use the default NTP addresses or enter
an IP address or host name of the NTP server(s) you would like to use. The
default NTP servers may not be accessible due to your corporate IT security
firewall settings. Therefore, you may choose to enter your own settings. It is
recommended that you do this prior to adding devices to the device list. This
will ensure that the data reported to Power Xpert Software is correctly time-
stamped.
1.
Click on the DATE/TIME link
(Figure 130, A)
in the toolbar of the
PXG600E configuration web page.
Figure 130
2.
If you leave the “Synchronize with NTP server(s)” box
(Figure 130, B)
checked, you can designate the NTP server(s) that you want to use.
3.
If you leave the “Synchronize with NTP server(s)” box
(Figure 130, B)
checked, the current “NTP Status” is shown
(Figure 130, C)
.
Some
typical status statements are:
Not Running
Started, not synchronized
Synchronizing with NTP server
Synchronized to aaa.bb.cc, NTP stratum 1 (where “aaa.bb.cc” is the
address of the NTP server)
PXG600E_365
A
E
F
G
D
B
C
H
I
