Eaton Power Xpert 9395 UPS, Installation And Operation Manual

Page: 170 / 250

UPS Operating Instructions
7-8 Power Xpert
TM
9395 UPS (450–825 kVA) Installation and Operation Manual 164201725—Rev 10 www.eaton.com/powerquality
System Level 1 Setup Password The System Setup Level 1 screen can be used to set the UPS date and time, set the serial ports,
change the Level 1 password, and log out of Level 1. In addition, the Level 0 functions are available. A
password is required to access the Level 1 functions. To enter the password, select
ENTER
PASSWORD from the System Setup Level 0 menu to display the Enter Password screen. Use the left
or right arrow pushbutton to select the password character position. Use the up or down arrow
pushbutton to change the password character. Once the password is entered, press the
DONE
pushbutton. The System Setup Level 1 menu screen is displayed. The default password is L1.
Function Selection Use the up or down arrow pushbutton to highlight the setup function screen desired, then press the
SELECT pushbutton to display the function screen. The Level 1 screen times out after 60 minutes or
can be logged out at any time by selecting the LOG OUT function from the menu screen.
Change Password The Change Password screen allows the System Setup Level 1 password to be changed. Select
CHANGE PASSWORD from the System Setup Level 1 menu to display the Change Password screen.
Use the left or right arrow pushbutton to select the password character position. Use the up or down
arrow pushbutton to change the password character. Once the new password is entered, press the
DONE pushbutton . The Change Password Save screen is displayed.
Change Password Save The Change Password Save screen lets you save the new password, retry another password, or abort
the password change. Press
SAVE , RETRY , or ABORT . If SAVE or ABORT is pressed, the action is
completed, and the System Setup screen displays. If RETRY is pressed, the Change Password screen
is redisplayed.
Time Format The Time Format Setup screen allows the selection of either month/day/year or day/month/year
formats for display on the screen and for logging events in the Event and History Logs. Select
SET
DATE AND TIME from the System Setup Level 1 menu to display the Time Format Setup screen. Use
the up or down arrow pushbutton to highlight the desired format, then press the SELECT pushbutton
to display the Set Date and Time screen. To return to the System Setup screen, press the ESC
pushbutton .
Set Date and Time MM/DD/
YYYY The Set Date and Time MM/DD/YYYY screen allows the internal date and time of the UPS to be set in
the month/day/year format. The date and time information is used for display on the screen and for
logging events in the Event and History Logs. Use the left or right arrow pushbutton to highlight the
setting to be changed. Use the up or down arrow pushbutton to make the change. When finished
making changes, use the left or right arrow pushbutton to highlight SAVE and the up or down arrow
pushbutton to select YES. To complete the save function and return to the System Setup screen,
select the return arrow pushbutton
.
Set Date and Time DD/MM/
YYYY The Set Date and Time DD/MM/YYYY screen allows the internal date and time of the UPS to be set in
the day/month/year format. The date and time information is used for display on the screen and for
logging events in the Event and History Logs. Use the left or right arrow pushbutton to highlight the
setting to be changed. Use the up or down arrow pushbutton to make the change. When finished
making changes, use the left or right arrow pushbutton to highlight SAVE and the up or down arrow
pushbutton to select YES. To complete the save function and return to the System Setup screen,
select the return arrow pushbutton
.
Com Port Selection The Com Port Setup screen allows selection of the serial COM port to set up. Select COM PORT
SETUP from the System Setup Level 1 menu to display the COM Port Setup screen. Use the up or
down arrow pushbutton to highlight the COM port to be set up, then press the SELECT pushbutton
.
To return to the System Setup screen, press the ESC pushbutton .
Com Port Setup The COM Setup screen is used to change and save the settings for the selected serial communication
port. The COM port number selected from the COM Port Setup screen displays. If the changes are not
wanted, use the
ABORT pushbutton to return to the COM Port Setup screen. Use the up or down
arrow pushbutton to highlight the setting to be changed. Use the return arrow pushbutton to toggle
through the values for the setting to make the change. Press
SAVE or ABORT . Once the action is
completed, the COM Port Setup screen is displayed.
Controls See paragraph 7.2.8 for details.
Table 7-3. Display Menu Operation (Continued)
Function Subfunction Operation