Eaton EASY222-DN, User Manual

Page: 53 / 284

Input data: Mode, S1 – S8
49
09/10 MN05013007Z-EN
Input data:
Mode, S1 – S8 Attribute ID: 3
The cyclic data transfer between DeviceNet master and the
EASY222-DN slave is provided by the input data byte 0, 1
and 2.
Table 7: Byte 0 to 2: input data, mode
The master reads the following data from bytes 0, 1 and 2:
Table 8: Byte 0: Operating mode
0 = status "0“ 1 = status "1"
Example:
Value 21
hex
= 00100001
bin
:
"easy" is in RUN mode and operates with input delay
Byte Meaning Value
0 Operating mode scan a table 8
1 Scan status of the easy outputs S1 to
S8 a table 9
2 Not used 00
hex
easy identification Bit
7 6 5 4 3 2 1 0
STOP/RUN
without input delay 0 0 0 1 0 0 0 0/1
with input delay 0 0 1 0 0 0 0 0/1