Eaton EASY222-DN, User Manual

Page: 176 / 284

easy800/MFD control
commands
172
09/10 MN05013007Z-EN
Receive data network: RN1 – RN32/
Send data network: SN1 – SN32
easyNet allows a point-to-point connection to be imple-
mented between the individual NET stations. The RN and SN
data are used for the data exchange (see the easy800
manual).
h
The RN SN data of the local device (Index = 0) to which
the EASY204-DP is fitted cannot be scanned. In this case
the command would be denied with the 0C
hex
signal.
Byte Meaning Value (hex), sent by
Master Slave Master Slave
Attribute ID: Read 91 –
0 Response:
Read successful – C2
Command rejected – C0
0 1 Len 04 04
1 2 Part no. For RN1 – RN32: 08 For RN1 – RN32: 08
For SN1 – SN32: 0A For SN1 – SN32: 0A
2 3 Index 01 – 08
1)
01 – 08
1)
3 – 6 4 – 7 Data 1 – 4 00 a table 86
1) Corresponds to NET-ID