Eaton EASY222-DN, User Manual

Page: 188 / 284

easy800/MFD control
commands
184
09/10 MN05013007Z-EN
Table 97: Index 0 – Bit IO
Table 98: Index 1 - Mode
h
The data for index 2 and 3 is transferred as a 32-bit value
in Intel format (Data 1 – Low Byte to Data 2 – High Byte).
Bit 7 6 5 4 3 2 1 0
FB input Data 1 – – – – – – – T
1
FB output Data 3 – – – – – E3
2)
E2
3)
E1
4)
1) Transfer of the source address specified at I1 to the target
address specified at I2 on rising edge.
Error outputs
2) Status 1 if the number of elements exceeds the source or
target range.
3) Status 1 if the source and target range overlap.
4) Status 1 if the source or target range are outside of the avail-
able marker range (offset error)
Data 1
(hex) Operating Mode
00 INI: Initializes the target range with a byte value
stored at the source address.
01 CPY: Copies a data block from a source to a target
range. Data block size is specified at NO.