Eaton EASY222-DN, User Manual

Page: 30 / 284

Device operation
26
09/10 MN05013007Z-EN
Information about the 4th display line:
Setting the address by means of easySoft
With easySoft, version 3.1
‹Menu
l
Online
l
Configuration of expansion units›
With easySoft, from version 4.01
‹Menu
l
Communication
l
Configuration
l
Expansion
units
l
EASY222-DN›.
Setting the address via the master PLC
The configuration software supplied with your master PLC
offers a further option of setting or modifying the MAC ID of
the gateway. For more information, refer to the included PLC
documentation.
xxx - xx . xx - xx
222 - 02. 10 - b
Hardware version, Index: b
Software version, OS version: 2.1
Device identity: EASY222-DN
h
The menu is only available in the communication view;
therefore please activate the “Communication” tab.
h The following applies for device version identity 01:
After you have changed the MAC ID via the basic device
you must restart EASY222-DN. To do this switch the
power supply off and on again. EASY222-DN devices with
a version ID > 01 take on the address automatically.