Eaton EASY222-DN, User Manual

Page: 56 / 284

Direct data exchange with
easy/MFD
(Polled I/O Connection)
52
09/10 MN05013007Z-EN
Value 44
hex
= 01000100
bin
:
This value sets the "easy" status from RUN to STOP. It is also
used only as command and is therefore based on the same
operating principle as the RUN command.
Value 00
hex
= 00000000
bin
:
If this value is written to the control byte, the gateway over-
writes the R data with zero. This function is of interest only
if a master is to be set to STOP mode and as resultant
measure transfers zero values to all I/O in order to ensure
safety state.
h
Even if the I/O of a control relay can be assigned directly
to a specific memory area of the master PLC, it is nonethe-
less important to conform with the correct data structure
format (e.g.: input data byte 0 = 14
hex
).