Eagle IntelliMap 502C iGPS, Installation And Operation Instructions Manual

Page: 97 / 196

89
Satellite Status Page. The first figure (left) shows the unit has not
locked on to any satellites and does not have a fix on its position. In the
second figure, the unit has a satellite lock-on with a 3D position ac-
quired (latitude, longitude and altitude) and WAAS reception.
This screen shows a graphical view of satellites that are in view. Each satel-
lite is shown on the circular chart relative to your position. The point in the
center of the chart is directly overhead. The small inner ring represents 45°
above the horizon and the large ring represents the horizon. North is at the
top of the screen. You can use this to see which satellites are obstructed by
obstacles in your immediate area if the unit is facing north.
The GPS receiver is tracking satellites that are in bold type. The re-
ceiver hasn't locked onto a satellite if the number is grayed out, there-
fore it isn't being used to solve the position.
Beneath the circular graph are the bar graphs, one for each satellite in
view. Since the unit has twelve channels, it can dedicate one channel
per visible satellite. The taller the bar on the graph, the better the unit
is receiving the signals from the satellite.
NOTE:
One of the data display options for the Satellite Status page is Posi-
tion Error (horizontal position error), which can appear in one of
the page's data boxes. Position Error will show you the expected er-
ror from a benchmark location. In other words, if the Position Error
box shows 50 feet, then the position shown by the unit is estimated
to be within 50 feet of the actual location.
This also gives you an indicator of the fix quality the unit currently
has. The smaller the position error number, the better (and more ac-
curate) the fix is. If the position error flashes dashes, then the unit
hasn't locked onto the satellites, and the number shown isn't valid.
(For details, see the Customize Page Displays entry in Sec. 8.)