Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual Download

Page: 154 / 196

146

To view Port Services information:

1. Use the arrow keys to move the cursor over a Port Services icon.
When it is selected, a pop-up name box appears.

2. Press

WPT

to display the Port Services Information screen.

NauticPath chart showing Port Services icon selected by cursor. When

first highlighted, the Pop-Up name box appears.

The Port Services information screen for a NauticPath chart contains
all the service information in one window.

3. To scroll through the service information window, use

↑

↓

to see the

types of services available. To return to the main page display, press

EXIT

repeatedly.

Port Services information screens.

Tidal Current Information

NauticPath charts contain Tidal Current information,
represented at large zoom ranges by a box icon with
the letter "

." These icons will appear when you are

Port Services
icon

Pop-up
name box

Summary of Contents for IntelliMap 502C iGPS




































































































































































































Search results

Summary of Contents for IntelliMap 502C iGPS

Reviews:

Related manuals for IntelliMap 502C iGPS

Brands by name

Popular brands

Eagle IntelliMap 502C iGPS, Installation And Operation Instructions Manual

Search results

Summary of Contents for IntelliMap 502C iGPS

Reviews:

Related manuals for IntelliMap 502C iGPS

Brands by name

Popular brands