manualshive.com logo in svg

Eagle IntelliMap 502C iGPS, Installation And Operation Instructions Manual

The Eagle IntelliMap 502C iGPS is a versatile fishfinder and chartplotter designed for anglers. With its detailed Installation And Operation Instructions Manual, you can easily set up and operate this feature-packed device. Download the comprehensive manual for free from manualshive.com to unlock the full potential of your Eagle IntelliMap 502C iGPS.

Share
Download
background image

183

EAGLE DATABASES LICENSE AGREEMENT

THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST
PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL,
FAMILY, OR HOUSEHOLD USE ("YOU") AND EAGLE ELECTRONICS,
INC., THE MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US").
USING THE PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT
CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF
YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS, PROMPTLY RE-
TURN THE PRODUCT WITHIN 30 DAYS OF PURCHASE. PLEASE RE-
TURN USING THE ENCLOSED UPS SHIPPING LABEL AND INCLUDE:
PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE NUMBER. YOUR
PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED.
PLEASE ALLOW 4-6 WEEKS TO PROCESS YOUR REFUND.

1. This License Agreement applies to the one or more databases that

your product may contain. We refer to these singly as a "Database"
and together as the "Databases." Your product may thus include the
"WBS Database" which contains worldwide background surface
mapping data, the "SmartMap Database" which contains inland
mapping data, or other Databases.

2. The Databases that your product may contain are licensed, not sold.

We grant to you the nonexclusive, nonassignable right to use these
Databases for supplemental navigation reference purposes, but only
as long as you comply with the terms and conditions of this License
Agreement. We reserve the right to terminate this license if you
violate any aspect of this License Agreement. You are responsible for
using official government charts and prudent navigation for safe
travel.

3. The Databases housed in your product are protected by the copy-

right notices appearing on the product or its screen(s). You may
NOT modify, adapt, translate, reverse engineer, decompile, disas-
semble, rent, lease, or resell any Database, and you may NOT create
derivative works based upon any Database or its contents. Any un-
authorized reproduction, use, or transfer of a Database may be a
crime and may subject you to damages and attorney fees.

4. This License Agreement will terminate immediately without prior

notice from us if you fail to comply with or violate any of the provi-
sions of this Agreement. Upon termination, you will promptly return
all products containing one or more Databases to us.

5. Prices and programs are subject to change without notice.

6. This License Agreement shall be governed by the laws of the State of

Oklahoma and comprises the complete and exclusive understanding
between you and us concerning the above subject matter.

Summary of Contents for IntelliMap 502C iGPS





































































































































































































Reviews:

No comments

Related manuals for IntelliMap 502C iGPS

Simrad SH90 - REV A Operator'S Manual preview
SH90 - REV A
Brand: Simrad Pages: 86
Simrad SC90 Installation Manual preview
SC90
Brand: Simrad Pages: 544
Humminbird 798c Operation Manual preview
798c
Brand: Humminbird Pages: 210
Humminbird 110 Fishin' Buddy User Manual preview
110 Fishin' Buddy
Brand: Humminbird Pages: 1

Brands by name

Popular brands

Load more brands