manualshive.com logo in svg

Eagle IntelliMap 502C iGPS, Installation And Operation Instructions Manual

The Eagle IntelliMap 502C iGPS is a versatile fishfinder and chartplotter designed for anglers. With its detailed Installation And Operation Instructions Manual, you can easily set up and operate this feature-packed device. Download the comprehensive manual for free from manualshive.com to unlock the full potential of your Eagle IntelliMap 502C iGPS.

Share
Download
background image

145

 

    

NauticPath chart showing Chart Note icon selected by cursor (left).

Note information screen (right).

To view Chart Note information:

1. Use the arrow keys to move the cursor over a Chart Note icon. When
it's selected, a pop-up name box appears.

2. Press 

WPT

 to display the Note Information screen.

3. To scroll through the Chart Note screen, use 

↑

 

↓

 arrow keys to read

the information. To return to the main page display, press 

EXIT

 repeat-

edly.

  

  

  

Entrance to Aransas Pass on a NauticPath chart with 8-nautical mile

zoom (left). Remaining images (left to right): same position at 4-

nautical mile, 1-nautical mile and 0.3- nautical mile zoom ranges.

Port Information

NauticPath charts contain Port Services information, represented by
anchor icons on the map display. These icons will appear when you are
zoomed in to a 4-nautical mile range. An example is displayed in the
following figures.

Summary of Contents for IntelliMap 502C iGPS





































































































































































































Reviews:

No comments

Related manuals for IntelliMap 502C iGPS

Humminbird 747c Operation Manual preview
747c
Brand: Humminbird Pages: 96

Brands by name

Popular brands

Load more brands