LCR7000 & RHEOSIGHTS P/N: 974194 |
Rev: A
|
ECO: 52468
www.dynisco.com
From lab to production,
providing a window into the process
-43-
This will define the range of the x axis of the fitting curve and what should be the interval
between two points on the curve. After the setting is fixed, click the “Interpolation Mode” to
switch to interpolation mode and do a curve fitting for the test.
The power law fitting curve is plotted from shear rate 0 – 500000 1/s. The interval
between two points on this curve is 1, which means you can hover on the curve and check
the shear viscosity value for shear rate 0, 1, 2, 3, 4, 5 … 499999, 500000 1/s.
Notice that more points on the curve takes more processing time, especially for
complicated curve fitting method like Modified-Cross model. Some crazy values may
kill the program.
