LCR7000 & RHEOSIGHTS P/N: 974194 |
Rev: A
|
ECO: 52468
www.dynisco.com
From lab to production,
providing a window into the process
-104-
selection of alpha characters above the SMART KEYS that correspond to the numeric/alpha key pressed.
When in the alpha mode it is not necessary to press the SHIFT key to select alpha input ever time. Just
press the appropriate numeric key to select different alpha characters. Press SHIFT to re-enter the numeric
input mode.
5.
ID (IDENTIFICATION)
– Ener operator and sample identifications. Define your operator and sample
identifications for each program by pressing the ID keypad. Toggle between operator and sample by
pressing the right SMART KEY. Press the ENTER SMART KEY to enter a new identification for the
desired parameter.
6.
SETUP
– Change system parameters. Setup provides a series of system settings pertaining to your test.
After pressing SETUP, scroll through the list of settings using the UP or DOWN SMART KEYS. Select
the EDIT SMART KEY to change the parameter accordingly.
7.
CROSSHEAD UP/DOWN
– Raise and lowers crosshead. These keys will manually operate the
CROSSHEAD/LOAD CELL up and down.
8.
CLEAR
– Clears present value in editing modes. The CLEAR key will clear any active value displayed in
the EDIT PROGRAM mode (EDIT SMART KEY then EDIT SMART KEY again) or any text entry. The
clear key will also clear the PROGRAM number in the VIEW PROGRAM mode (EDIT SMART KEY)
where a new program number can be entered.
9.
BACKSP (BACKSPACE)
– Destructive backspace. The BACKSP key performs a destructive backspace
function in text editing screens.
10.
NUMERICAL/ALPHA INPUT
– Allows for numerical and alphanumerical character input. Using the
combinations of the SHIFT key and the NUMERAL/ALPHA INPUT keys, either numbers or letters can be
entered in the SAMPLE, OPERATOR and PROGRAM identification modes. Pressing SHIFT then the
appropriate numeric/alpha key enters the alpha input mode. This mode provides a selection of the
characters above the SMART KEYS that correspond to the numeric/alpha key pressed. Press SHIFT to re-
enter the numeric input mode. A space can be entered by pressing the 3, YZ keypad.
11.
DISPLAY
– 4 X 20 instrument display. Your instrument uses a 4 line vacuum fluorescent display, VFD,
to display information. Brightness can be adjusted in the SYSTEM TEST mode.
12.
SMART KEYS
- Main Keys used for browsing, selecting and entering values and parameters. Dynisco
provided three keypads below the VFD, to allow for quick navigation of the machine interface. The
functions of theses keys change depending on the mode of operation. Each SMART EY is clearly and
concisely labeled to assist you in programming your instrument.
