Dynapac D.ONE, Operating Instructions Manual

Page: 77 / 190

2. Press the start button.
ð
The engine should not start.
3. Release the travel lever and check that it returns to the neu-
tral position on its own.
The automatic return to neutral position can
be impaired by dirt (e.g. mortar, concrete res-
idues).
4. If necessary, clean the travel lever with a clean cloth or
brush.
5. Shift the steering lever to the left or right and hold in place.
6. Press the start button again.
ð
The engine should not start.
7. Release the steering lever and check that it returns to the
neutral position on its own.
The automatic return to neutral position can
be impaired by dirt (e.g. mortar, concrete res-
idues).
8. If necessary, clean the steering lever with a clean cloth or
brush.
9. Start the engine.
10. Before starting to drive make sure that the driving area is
absolutely safe.
11. Move the travel lever slowly forwards or backwards.
ð
Make sure the machine travels in the chosen direction.
12. Shift the steering lever to the left or right.
ð
Make sure the machine steers in the chosen direction.
13. Release the travel lever.
ð
Make sure the machine brakes until it comes to a stand-
still.
B-720-0043
Fig. 74
MIN
MAX AUTOMATIC
B-720-0023
Fig. 75
MIN
MAX AUTOMATIC
B-720-0022
Fig. 76
MIN
MAX AUTOMATIC
B-720-0023
Fig. 77
Operation – Start-up procedure
D.ONE 77