Dynapac D.ONE, Operating Instructions Manual

Page: 120 / 190

8.8.5 Changing the oil in the exciter housing
Loads may only be lifted by an expert/qualified person.
Do not use lifting points that are damaged or impaired in any way.
Only use lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded.
Always use appropriate lifting tackle at the lifting points.
Use lifting tackle only in the specified loading direction.
Lifting tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in an
uncontrolled way. If necessary, hold the load steady with guide
ropes.
Perform this maintenance work at the latest after
one year.
NOTICE!
Components may get damaged!
– Only change the oil at operating temperature.
– Only use oil of the permitted specification
Ä
Chapter 8.3.4 „Oil for exciter shaft
housing“ on page 108 .
– Filling quantity:
Ä
Chapter 8.4 „List of fuels and
lubricants“ on page 109
– Do not use low-ash engine oils for the exciter
shaft housing.
Protective equipment:
n
Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.5 „Parking the machine
in secured condition“ on page 90 .
2. Engage the articulation lock
Ä
Chapter 8.2.2.1 „Engaging the
articulation lock“ on page 103 .
3. Attach lifting tackle to the front lashing point.
4. Lift the machine at the front and support the front drum.
5. Secure the rear drum with a wheel chock.
710 mm
28 in
B-720-0045
Fig. 147
Maintenance – Every 250 operating hours/annually
D.ONE 120