Dynapac D.ONE, Operating Instructions Manual

Page: 32 / 190

3.6 Start-up procedure
3.6.1 Prior to start-up
Only use machines which have been serviced at regular intervals.
Become acquainted with the equipment, the indicators and control
elements, the working principle of the machine and the working
area.
Use your personal protective equipment (hard hat, safety boots, if
necessary also goggles and ear protection).
Do not take any loose objects with you or fasten them to the
machine.
Before start-up, check whether:
n persons or obstructions are beside or under the machine;
n the machine is free of oily and combustible materials;
n all protective devices are in place;
n all maintenance flaps and doors are closed and locked.
Before start-up, carry out all required visual inspections and func-
tion tests.
If the tests reveal damage or other defects, the machine must not
be operated until these have been rectified.
Do not operate the machine with defective indicators and control
elements.
3.6.2 Starting the engine
Before starting and moving the machine, make sure that there is
nobody in the danger zone.
The operator’s position is behind the machine.
The machine must only be started and operated from the opera-
tor’s position.
The remote control must be carried in front of the body, as
intended.
To start, set all control levers to “neutral position”.
Do not use any starting aids like start pilot or ether.
The machine must not be operated with damaged, missing or non-
functional safety devices.
After starting, check all display instruments.
Do not inhale exhaust fumes, because they contain toxic sub-
stances, which could cause damage to health, unconsciousness or
even death.
For operation in closed or partly closed rooms ensure adequate
ventilation.
Concerning your safety – Start-up procedure
D.ONE 32