Dynapac D.ONE, Operating Instructions Manual

Page: 116 / 190

8.8 Every 250 operating hours/annually
8.8.1 Change engine oil and oil filter cartridge
Perform this maintenance work at the latest after
one year.
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at oper-
ating temperature.
– Use only oil of the permitted specification
Ä
Chapter 8.3.1 „Engine oil“ on page 105 .
– Filling quantity: Ä Chapter 8.4 „List of fuels and
lubricants“ on page 109
Protective equipment: n Working clothes
n Safety shoes
n
Protective gloves
1. Park the machine safely Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90 .
2.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Unscrew the drain plug and collect any escaping oil.
3. Screw the drain plug back in tightly.
4. Thoroughly clean the outside of the oil filter cartridge.
5. Unscrew the oil filter cartridge using an appropriate strap
wrench.
6. Remove any dirt from the sealing face of the filter carrier.
7. Thinly apply oil to the rubber seal of the new oil filter car-
tridge.
8. Screw on the oil filter cartridge and tighten by hand.
B-720-0044
Fig. 137
B-720-0091
Fig. 138
Maintenance – Every 250 operating hours/annually
D.ONE 116