16
NX Editor User’s Guide
Dynalab Test Systems
Revised 04/27/2011
Copyright 2011
USB SETTINGS
NONE
USB SETTINGS
NXVIEW
MORE: UPGRADE FIRMWARE
Select this option to upgrade the NX Tester’s firmware from the memory card. The firmware upgrade
file must be present on the memory card. If more than one firmware upgrade file is present on the
memory card, the NX Tester will allow the user to scroll through the files using the up/down arrows to
select the desired file. When the desired upgrade file is displayed, press the Green button to proceed.
MORE: USB
If the NX Tester is equipped with a USB port, this selection provides the means to configure the USB
port for use with NX View. The UP arrow button is used to toggle between the two selections. The
selection is confirmed by pressing the green button. The NXVIEW selection enables the USB port to be
used to communicate with NX View on a PC.
UP arrow toggles
between selections
