Dynalab Test Systems
NX Tester User’s Guide
11
Copyright 2011
Revised 04/27/2011
Month (1-12)
06
Day (1-31)
05
Year (1999-2070)
2004
Hours (0-23)
19
Minutes (0-59)
22
If the current clock settings are satisfactory, press the RED button to go back to exit this feature.
If the settings need to be changed, press the GREEN button.
The NX Tester first shows the 2-digit month setting. Use the Up/Down Arrow buttons to change the
first digit, then press the GREEN button. Then, use the Up/Down arrow buttons to change the second
digit, then press the GREEN button. If a digit does not need be changed, press the GREEN button to
skip.
Next, the NX Tester shows the 2-digit day of month setting. Use the Up/Down Arrow buttons to
change the first digit, then press the GREEN button. Then, use the Up/Down arrow buttons to change
the second digit, then press the GREEN button. If a digit does not need be changed, press the GREEN
button to skip.
Next, the NX Tester shows the 4-digit year setting. Use the Up/Down Arrow buttons to change the first
digit, then press the GREEN button. Repeat for each of the subsequent 3 digits. If a digit does not need
be changed, press the GREEN button to skip.
Next, the NX Tester shows the 2-digit hours setting. Use the Up/Down Arrow buttons to change the
first digit, then press the GREEN button. Repeat for the second digit. If a digit does not need be
changed, press the GREEN button to skip.
