10
NX Editor User’s Guide
Dynalab Test Systems
Revised 04/27/2011
Copyright 2011
SELECTED_PROGRAM
RUN FILES
SELECT >SETUP
PROBE
CONFIGURATION
RESTRICTIONS
DIAGNOSTICS
AUTOLOEARN
>CONFIGURATION
RESTRICTIONS
DIAGNOSTICS
AUTOLOEARN
CONFIGURATION
VOLUME LANGUAGE
CLOCK SERIAL
ID MORE…
CONFIGURATION
VOLUME LANGUAGE
>CLOCK SERIAL
ID MORE…
TUESDAY
JUNE 08, 2004
10:09:48
CONFIGURATION
>VOLUME LANGUAGE
CLOCK SERIAL
ID MORE…
Volume
|** |
SETUP Menu
The SETUP menu is accessed by selecting SETUP from the Main Menu. Once selected, the SETUP
menu is presented. (NOTE: A Supervisor key must be inserted to gain access to the SETUP menus.)
CONFIGURATION
The CONFIGURATION menu is accessed by selecting CONFIGURATION from the SETUP menu.
Once selected, the CONFIGURATION menu is presented.
The CONFIGURATION menu provides access to the following setup options:
•
Volume Control
•
Setting the NX Tester’s clock
•
Setting the NX Tester’s ID
•
Selecting the language used in displaying menus
•
Adjusting Serial Port settings
•
Configuring the substring parameters for the Automatic Program Selection feature (under
MORE)
•
Upgrading the NX Tester’s firmware from the memory card (under MORE)
VOLUME
Select VOLUME to adjust the NX Tester’s sound volume.
Use the UP Arrow button to increase volume, Use the DOWN Arrow button to decrease volume.
CLOCK
To see or change the NX Tester’s internal clock, select CLOCK from the CONFIGURATION menu.
After selection, the NX Tester displays the current clock setting.
