manualshive.com logo in svg

Dynalab NX Series, User Manual

Share
Download
Dynalab NX Series User Manual Download Page 11

Dynalab Test Systems

 

NX Tester User’s Guide 

 

9 

Copyright 2011 

Revised 04/27/2011 

29 FILES 

168794 BYTES USED 

1332458 BYTES FREE 

 DIR 
 DELETE ONE 
 DELETE ALL 
>INFO 

When DELETE ONE is selected, the NX Tester displays the directory information as previously 
described.  The UP and DOWN arrow keys can be used to scroll through the program list.  Once the 
program to be deleted is displayed, the selection is made by pressing the GREEN button.  The NX Tester 
will respond by requesting a confirmation – Press the GREEN button to confirm. 

DELETE ALL 

When DELETE ALL is selected, the NX Tester will respond by requesting a confirmation – Press the 
GREEN button to confirm.  All files will be deleted. 

INFO 

 

 

 

 

When INFO is selected, the NX Tester displays information about file storage capacity as shown above.  
The number of files is displayed on the first line.  The amount of used storage space is displayed on the 
second line.  The amount of free storage space is displayed on the third line. 

Summary of Contents for NX Series










































Reviews:

No comments

Brands by name

Popular brands

Load more brands