Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 112 / 150

Programming
110 Service Instructions 667 PREMIUM - 03.0 - 01/2018
The reset is carried out immediately after selecting a subitem with the
arrow buttons and then pressing OK. There is no further query, and
neither is there a message stating that the reset was performed.
To reset the data:
1. Select the
Reset
parameter.
2. Press the OK button to confirm the selection.
3. Select the desired option – see the table – with the ▲
/
▼ buttons.
4. Press the OK button to confirm the selection.

The reset is carried out without any further query and without a
confirmation message.
Options for resetting the data
14.11
Data Transfer
submenu
Use this submenu to transfer data between the machine – or more
precisely the control – and a USB key. Various options are available for
the data transfer, which are explained in the subchapters.
The menu is divided into the following submenus:
Important
It is permitted only to use USB keys bought from Dürkopp Adler.
Menu item Setting options
Reset data
All parameters are reset to the factory settings; this does not apply
to the programs and the calibration values.
Reset programs
All created programs are erased.
Reset Calibr.
All calibration values are reset to the factory settings.
Reset all
All parameters, programs, and calibration values are reset to the
factory settings.
Parameter Explanation Reference
All data
All data

p. 111
Only Data
Only data

p. 112
Programs
Programs

p. 113
Error Log
Error list

p. 115